-
Automated Fluid Dispensing Systems
- IDS2000 Automated Dispensing Systems
- IDS1000-RT Automated Dispensing Systems
- ILS2000 Automated Dispensing Systems
- GR2000 Desktop Gantry Robots
- GR1000 Desktop Gantry Robots (NEW)
- 3-Axis Desktop Dispensing Robots
- 4-Axis Desktop Dispensing Robots
- Dual Y-Axis Desktop Dispensing Robots (NEW)
- 5-Axis Desktop Dispensing Robots (NEW)
-
Dispensing Valves
- Snuff Back Valve and Controller
- Positive Displacement Pump Dispensing
- AV100 Auger Valve and Controller (NEW)
- AV200 Auger Valve and Controller (NEW)
- AV300 Auger Valve and Controller (NEW)
- Spray Valve and Controller
- Precision Piston Valve and Controller
- Needle Valve NV200
- Needle Valve NV400
- Needle Valve NV500 (NEW)
SV300 series is an air atomizing Spray Valve. It utilizes low air pressure to break coating materials into tiny droplets and deposit it onto any coating surfaces. Atomizing pressure can be as low as 8 psi. This will ensure that coating material hitting the coating surfaces will not “bounce’ or blown off the intended coating area. The valve comes with an extended nozzle for dipping into solvent to prevent drying out of coating material. Any cleaning or flushing is only on the extended nozzle assembly.
SVC1000 is a dedicated controller for spray valves. It has a comprehensive range of features for good control of the spraying parameters. It is micro-P driven and can be easily integrated onto any existing system.
Features of Valve
- Suitable for low viscosity fast drying conformal coating
- Low atomizing air requirement
- Fine adjust of coating material through a micrometer
- Compact Design, easy maintenance
- Extended nozzle
Features of Controller
- User friendly software provides simple setting of all the necessary parameters
- LCD display screen
- Microprocessor control
- Easily integrated into any coating system
- No maintenance needed
SV 300 Spray Valves | SV300 / SV301 / SV302 |
Valve type | Spray valve (Wide Area / Narrow Path) |
Operating Air Pressure | 4 bar to 6 bar |
Atomizing Air Pressure | ≤ 2 / 3 / 3 Bar |
Fluid Delivery Pressure | Max 7.0 bar |
Minimum Spray Area (Diameter) | 20 / 6 / 6 mm |
Maximum Spray Area (Diameter) | 60 / 16 / 16 mm |
Driving part materials | |
Cylinder Body | Aluminium |
Cap | Aluminium |
Cap Piston | SUS304 Stainless Steel |
Check Body | SUS304 Stainless Steel |
Wetted part materials | |
Chamber | Stainless steel |
CAP, CV body | Stainless steel |
Seals | Teflon |
Connecting ports | |
Operating Air Inputs | M5 thread w/ push-in fitting for 6mm OD tube |
Material Inlet | 1/8-27 NPT |
Weight | 360 g |
SVC1000 Controller | |
Power | 120/220VAC |
Air Pressure Range | Max. 6.0 kgf/cm2 |
Spray Pressure | 0 - 2 bar |
Valve Operating Pressure | Max 6 bar |
Dispensing Time Range | Up to 99.99 sec |
Valve, Operating Time | Up to 99.99 sec |
Interval Time | Up to 99.99 sec |
Operating Mode | Timer / Auto Mode, Manual mode, Interval mode |
Weight | Approx. 4.0 Kg |