- Fluid Dispensing Valves and Controllers
- Automated Fluid Dispensing Systems
- Dual Components Meter-Mix Dispensing Systems
- Fluid Centrifugal Deaerator
Technodigm Spray Coating System is a programmable selective coating system that allows you to dispense only on required areas to reduce cycle time and eliminate the need for masking. It comes with various types of spray heads to cater to different coating material and spraying profile.
SCS4000 Spray Coating System is an efficient machine for applying conformal coatings for various applications. It improves productivity by allowing the selective coating of areas without the need for time consuming masking. Quality of spray is repeatable and coating can be applied especially thin or thick.
SCS4000 is a fully programmable selective coating system with a user-friendly proprietary software to perform any intricate patterns that is needed for a good coating process. It also has a programmable tilt and rotate function to access most areas. Together with the gantry system and the spray valve, the system can deliver an even coated area with a maximum of approximately 0.01mm*.
Friendly features for area coating allows for fast programming. Dry runs after programming allows user to check position without actual spraying. Valves are easy to service and maintain. There is no expensive replacement part.
- Material and substrate dependant
- Ease of programming with PC-based Software
- Purging stations for material
- Low atomising pressure
- Strong internal exhaust with overspray chamber for fume
- Low level sensor for material
- Material tank with low level sensor
- Vision option for Fiducial check and X/Y programming