Product
-
Automated Fluid Dispensing Systems
- IDS2000 Automated Dispensing Systems
- IDS1000-RT Automated Dispensing Systems
- ILS2000 Automated Dispensing Systems
- GR2000 Desktop Gantry Robots
- GR1000 Desktop Gantry Robots (NEW)
- 3-Axis Desktop Dispensing Robots
- 4-Axis Desktop Dispensing Robots
- Dual Y-Axis Desktop Dispensing Robots (NEW)
- 5-Axis Desktop Dispensing Robots (NEW)
+
-
Dispensing Valves
- Snuff Back Valve and Controller
- Positive Displacement Pump Dispensing
- AV100 Auger Valve and Controller (NEW)
- AV200 Auger Valve and Controller (NEW)
- AV300 Auger Valve and Controller (NEW)
- Spray Valve and Controller
- Precision Piston Valve and Controller
- Needle Valve NV200
- Needle Valve NV400
- Needle Valve NV500 (NEW)
+
Precision Piston Valve and Controller
NV300 is a dedicated valve designed for small volume dispensing applications. It can be used for dots, lines, potting or any applications that requires good volume precision. It has a good positive shut off that also enables it to dispense without dripping. Maintenance is relatively easy and all wetted parts are made of stainless steel. NV300 works with a controller, NVC3000. When connected to the NV3000, all the parameters necessary for good control and dispensing can be set.
NVC3000 is a microprocessor based controller. It has a LCD screen for display and a simple menu. It has both auto (with digital timing) and manual mode.
Features of Valve NV300
- Fast response time
- Good positive shutoff
- No dripping
- Stainless Steel Wetted Parts
- Especially good for not heavily filled epoxy and adhesive.
- Easy Maintenance
- Good volumetric dispensing
Features of Controller NVC3000
- LCD Display
- 10 Memory
- Auto cycling
- Manual / Timer mode
- Digital Timing
- Microprocessor Driven
- No maintenance
- User-friendly Programming
NV300 Valve | |
Voltage | 24VDC Input Board-Level Driver |
Cycle time | 600 cycle/min |
Operating Air | 4 kgf/cm2 |
Material Pressure | 7.0 kgf/cm2 (Max) |
Viscosity | Low / High |
On/Off | Piston |
Wetted Part | Stainless steel |
Weight | 490 g |
NVC3000 Controller | |
Time Range | 0.02 to 99.999 sec |
Voltage | 110/220 VAC |
Input Pressure | Up to 100 psi |
Operation Mode | Manual, Auto, Cycle |
Internal Memory | 10 Memory Locations |
Response Time | 100 ms |
Size | 133 x 131 x 146 mm |
Weight | 2 kg |