- Fluid Dispensing Controllers, Valves and Pumps
- Automated Fluid Dispensing Systems
- Dual Components Meter-Mix Dispensing Systems
- Fluid Centrifugal Deaerator
- UV Curing Systems
- Dispensing Accessories
Fluid Dispensing Controllers, Valves and Pumps
TechnoDigm Fluid Dispensing Valves and Controllers are designed to meet the dispensing demand of every application. Our comprehensive range ensures excellent accuracy and reliability over all types of material viscosities and shot sizes.
Positive Displacement Pump (PDP) utilizes direct drive mechanism to deliver precise amount of epoxy without using compressed air. It can be used on any type of materials that is package in standard 30 and 10cc industrial barrel. It is especially useful for volumetric dispensing of short pot life material because there is no contact between motorized parts and material. This ensures that no material will be dried or cured within the equipment, enabling it to be used with little or no maintenance.
SV300 series is an air atomizing Spray Valve. It utilizes low air pressure to break coating materials into tiny droplets and deposit it onto any coating surfaces. Atomizing pressure can be as low as 8 psi. This will ensure that coating material hitting the coating surfaces will not “bounce’ or blown off the intended coating area. The valve comes with an extended nozzle for dipping into solvent to prevent drying out of coating material. Any cleaning or flushing is only on the extended nozzle assembly.
NV300 is a dedicated valve designed for small volume dispensing applications. It can be used for dots, lines, potting or any applications that requires good volume precision. It has a good positive shut off that also enables it to dispense without dripping. Maintenance is relatively easy and all wetted parts are made of stainless steel. NV300 works with a controller, NVC3000. When connected to the NV3000, all the parameters necessary for good control and dispensing can be set.
Needle Valve can be used for a wide range of material; from low to high viscosity fluid such as light-curable adhesives, solvents, inks, lubricants, grease and silicone oils. This needle valve offers extreme accuracy, whether dispensing beads or shots, and is easily integrated into high-volume automation.
The AD2000E is a versatile automatic liquid dispenser which is perfectly suited for dispensing a wide variety of materials. From minute dots of grease to larger volumes of potting materials and silicones, the AD2000 is able to accurately dispense the desired amount of material. The fine "suck- back" adjuster allows precise and effective control of dripping when dispensing low viscosity materials.